Date：2017-11-20
Pneumatic baler work principle:
1, pneumatic balers for the friction hot melt type, through the high-speed friction overlap plastic belt heat bonding, so called frictional hot melt.
2, the compressed gas into the cylinder piston, piston and the upper part of the vibrator connected by the shaft bolt. The vibrator vibrates back and forth with the friction plate so that the strap is overlapped.
3, Pneumatic baler The middle of the vibrator has an oval hole, the eccentric shaft of the leaf motor rotates back and forth in this hole.
4, high-speed rotation of the gas motor, the maximum speed of 10,000rpm, making the vibrator, such as pendulum general high-speed movement.
5, the lower binding belt is fixed on the mating plate by the triangular teeth of the bottom punch; the upper binding belt is heat-bonded due to the violent vibration of the vibrator triangular teeth and the friction of the lower binding belt.
